Cisco Linksys WAG120N is easily configured by the following steps
Buy Linksys WAG120N from here
BSNL internet. Here is the simple steps to do it:
1. Conect your LinkSys Router with a LAN cable to your system
2. Give static IP to your sytem in range of 192.168.1.x
3. Open IE and type 192.168.1.1
4. Username : admin, Password: admin(Default)
5. Goto Basic setup page
6. Select Encapsulation : RFC 2516 PPPoE
7. Multiplexing : LLC
8. Leave PCR and SCR as blank
9. Make Autodetect as disable
10. Under Virtual Circuit
VPI: 0
VCI:35
11.Under PPPoE settings
User Name: your bsnl user id
Password: your bsnl password
Service Name: Dataone
Buy Linksys WAG120N from here
Buy Linksys WAG120N from here
BSNL internet. Here is the simple steps to do it:
1. Conect your LinkSys Router with a LAN cable to your system
2. Give static IP to your sytem in range of 192.168.1.x
3. Open IE and type 192.168.1.1
4. Username : admin, Password: admin(Default)
5. Goto Basic setup page
6. Select Encapsulation : RFC 2516 PPPoE
7. Multiplexing : LLC
8. Leave PCR and SCR as blank
9. Make Autodetect as disable
10. Under Virtual Circuit
VPI: 0
VCI:35
11.Under PPPoE settings
User Name: your bsnl user id
Password: your bsnl password
Service Name: Dataone
Buy Linksys WAG120N from here
Hi! Thanks for sharing this article when read it than configuration with device otherwise before that I had confused and thanks to you. visit more info Cisco Router Support
ReplyDelete